4. My Image Function

4. My Image Function (Continued)

Congure the following items from a web browser when MY IMAGE function is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter "http://192.168.1.10/" into the address bar of the web browser.

2)Enter your user name and password, and then click the [OK].

3)Click the [Port Settings] on the main menu.

4)Click the [Enable] check box to open the My Image Port (Port: 9716). Click the [Enable] check box for the [Authentication] setting when authentication is required, otherwise clear the check box.

5)Click the [Apply] button to save the settings.

When the authentication setting is enabled, the following settings are required.

6)Click the [Security Settings] on the main menu.

7)Select the [Network Control] and enter the desired authentication password.

8)Click the [Apply] button to save the settings.

NOTE • The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port: 4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).

The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. You can restart the network connection by clicking the [Network Restart] on the main menu.

71

Page 184
Image 184
Hitachi ED-A220N user manual My Image Function