Hitachi ED-A220N Temporarily freezing the screen, Temporarily blanking the screen, Freeze button

Temporarily freezing the screen

1. Press the FREEZE button on the remote control.

The “FREEZE” indication will appear on the screen (however, the indication will not appear when the OFF is selected for the MESSAGE item in the SCREEN menu (49)), and the projector will go into the FREEZE mode, which the picture is frozen.

To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.

Operating

FREEZE button

VIDEO		MY SOURCE/
	COMPUTER DOC.CAMERA
ASPECT	AUTO	SEARCH	BLANK
MAGNIFY	FREEZE	PAGE	VOLUME
		UP

ON

DOWN

OFF

KEYSTONE MY BUTTON MUTE

1 2

●The projector automatically exits from the FREEZE mode when some control buttons are pressed.

●If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long.

●Images might appear degraded when this function is operated, but it is not a malfunction.

Temporarily blanking the screen

1. Press BLANK button on the remote control.

The BLANK screen will be displayed instead of the screen of

input signal. Please refer to BLANK item in SCREEN menu (47).

To exit from the BLANK screen and return to the input signal screen, press BLANK button again.

BLANK button

VIDEO	MY SOURCE/
	COMPUTER DOC.CAMERA
ASPECT	AUTO SEARCH BLANK
MAGNIFY	FREEZE PAGE	VOLUME
	UP

ON

DOWN

OFF

KEYSTONE MY BUTTON MUTE

1 2

●The projector automatically exits from the BLANK mode when some control buttons are pressed.

CAUTION ►If you wish to have a blank screen while the projector’s lamp is on, use the BLANK function above.

Taking any other action may cause the damage on the projector.

NOTE • The sound is not connected with the BLANK screen function. If necessary, set the volume or mute rst. To display the BLANK screen and mute the sound at one time, use AV MUTE function (57).

27