Hitachi ED-A220N user manual Position, USB Type B or Hdmi port

IMAGE menu

Item	Description
	Using the ◄/► buttons adjusts the vertical position.
	Down Ù Up
	• Over-adjusting the vertical position may cause noise to appear on
	the screen. If this occurs, please reset the vertical position to the
V POSITION	default setting. Pressing the RESET button when the V POSITION
	is selected will reset the V POSITION to the default setting.
	• When this function is performed on a video signal or an s-video	35)
	signal, the range of this adjustment depends on OVER SCAN (
	setting. It is not possible to adjust when OVER SCAN is set to 10.
	• This function is unavailable for a signal from the LAN, USB TYPE A,
	USB TYPE B or HDMI port.
	Using the ◄/► buttons adjusts the horizontal position.
	Right Ù Left
	• Over-adjusting the horizontal position may cause noise to appear on
	the screen. If this occurs, please reset the horizontal position to the
	default setting. Pressing the RESET button when the H POSITION is
H POSITION	selected will reset the H POSITION to the default setting.
	• When this function is performed on a video signal or an s-video	35)
	signal, the range of this adjustment depends on OVER SCAN (
	setting. It is not possible to adjust when OVER SCAN is set to 10.
	• This function is unavailable for a signal from the LAN, USB TYPE A,
	USB TYPE B or HDMI port.

(continued on next page)

36