Sharp XG-C435X-L, XG-C465X-L operation manual Computer Compatibility Chart, Appendix

Computer Compatibility Chart

Computer
• Multiple signal support	Pixel Clock: 12–108 MHz
Horizontal Frequency: 15–70 kHz	Sync signal: Compatible with TTL level
Vertical Frequency: 43–85 Hz	• Compatible with sync on green signal

The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards.

PC/MAC	Resolution		Horizontal Frequency	Vertical Frequency	VESA Standard	DVI	Display
			(kHz)	(Hz)		Support
		640 ⋅ 400	27.0	60
			31.5	70
			37.9	85	✔
		720 ⋅ 400	27.0	60
			31.5	70
			37.9	85	✔
	VGA		26.2	50
			31.5	60	✔
		640 ⋅ 480	34.7	70		✔	Upscale
			37.9	72	✔
			37.5	75	✔
			43.3	85	✔
			31.3	50
			35.2	56	✔
		800 ⋅ 600	37.9	60	✔
	SVGA		46.6	70
PC			48.1	72	✔
			46.9	75	✔
			53.7	85	✔
			40.3	50
		1,024 ⋅ 768	48.4	60	✔	✔	True
	XGA		56.5	70	✔
			60.0	75	✔
			68.7	85	✔
		1,280 ⋅ 720	45.0	60
		1,280 ⋅ 768	47.8	60	✔
	WXGA	1,280 ⋅ 800	62.8	75	✔
		1,360 ⋅ 768	47.7	60	✔
		1,366 ⋅ 768	47.8	60			Intelligent Compression
		1,152 ⋅ 864	55.0	60
	SXGA		66.2	70
			67.5	75	✔
		1,280 ⋅ 1,024	64.0	60	✔
	SXGA+	1,400 ⋅ 1,050	64.0	60
MAC 13"	VGA	640 ⋅ 480	34.9	67			Upscale
MAC 16"	SVGA	832 ⋅ 624	49.7	75
MAC 19"	XGA	1,024 ⋅ 768	60.2	75			True
MAC 21"	SXGA	1,152 ⋅ 870	68.7	75			Intelligent Compression

Note

•This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s operation manual.

•When this projector receives 640 ⋅ 350 VESA format VGA signals, “640 ⋅ 400” appears on the screen.

•When projecting the RGB interlace signal using COMPUTER/COMPONENT 1, 2 or DVI-D with “Signal Type” set to “Auto” or “RGB”, the image may not be projected as desired. In this case, use either Video or S-Video.

•When “Screen resolution” of the computer is different from the resolution displayed on the projected image, follow the procedures shown below.

-Refer to “Resolution” on the “SIG-ADJ” menu and select the same resolution as the resolution in “Screen resolution” of the computer.

-Depending on the computer you are using, the output signal may not be faithful to the “Screen resolu-

tion” adjustment. Check the settings of the computer's signal output. If the settings cannot be changed, it is recommended that the resolution be set to “1024 ⋅ 768”.

DTV	Signal	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	DVI Support
	480I	15.7	60
	480P	31.5	60	✔
	540P	33.8	60	✔
	576I	15.6	50
	576P	31.3	50	✔
	720P	37.5	50	✔
	720P	45.0	60	✔
	1035I	33.8	60
	1080I	28.1	50	✔
	1080I	33.8	60	✔

Appendix

-65