Manuals / Sharp / Computer Equipment / Projector

Sharp XG-C465X-L Rest your eyes occasionally, Avoid locations with extremes of tem- perature

Models: XG-C435X-L XG-C465X-L

1 73
Download 73 pages 51.24 Kb
Page 10
Image 10

IMPORTANT SAFEGUARDS

Ensure that you read the following safeguards when setting up your projector.

Caution concerning the lamp unit

■Potential hazard of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Pro- jector Dealer or Service Cen- ter for replacement.

See “Regarding the Lamp” on page 61.

CAUTION

PRECAUCIÓN

PRÉCAUTION

Caution concerning the setup of the pro- jector

■For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from hu- midity, dust and cigarette smoke. When the projector is subjected to these environments, the vents and lens must be cleaned more often. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center.

Do not set up the projector in places ex- posed to direct sunlight or bright light.

■Position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

The projector may be safely tilted to a maximum angle of 9 degrees.

■Placement should be within ±9 degrees of horizontal.

When using the projector in high-altitude areas such as mountains (at altitudes of approximately 1,500 meters (4,900 feet) or more)

■When you use the projector in high-altitude areas with thin air, set “Fan Mode” to “High”. Neglecting this can affect the longevity of the optical system.

Warning about placing the projector in a high position

■When placing the projector in a high posi- tion, make certain it is carefully secured to avoid personal injury caused by the projec- tor falling down.

Do not subject the projector to hard im- pact and/or vibration.

■Take care with the lens so as not to hit or damage the surface of the lens.

Rest your eyes occasionally.

■Continuously watching the screen for long hours will cause eye strain. Take regular breaks to rest your eyes.

Avoid locations with extremes of tem- perature.

■The operating temperature of the projector is from 41°F to 95°F (+5°C to +35°C).

■The storage temperature of the projector is from –4°F to 140°F (–20°C to +60°C).

Do not block the intake and exhaust vents.

■Allow at least 7 7/8 inches (20 cm) of space between the exhaust vent and the nearest wall or obstruction.

■Ensure that the intake vent and the exhaust vent are not obstructed.

■If the cooling fan becomes obstructed, a pro- tection circuit will automatically put the pro- jector into standby mode to prevent overheat damage. This does not indicate a malfunc- tion (see pages 59 and 60). Remove the pro- jector power cord from the wall outlet and wait at least 10 minutes. Place the projector where the intake and exhaust vents are not blocked, plug the power cord back in and turn on the projector. This will return the projector to the normal operating condition.

-8

Page 9 Page 11
Page 10
Image 10
Sharp XG-C465X-L, XG-C435X-L operation manual Rest your eyes occasionally, Avoid locations with extremes of tem- perature
Page 9 Page 11

XG-C435X-L, XG-C465X-L specifications

The Sharp XG-C465X-L and XG-C435X-L projectors are sophisticated devices designed for a range of professional environments, including corporate settings, educational institutions, and high-stakes presentations. Both models boast impressive specifications and features that cater to users seeking high-quality projection capabilities.

Firstly, the XG-C465X-L model is equipped with a WXGA resolution of 1280 x 800 pixels, making it ideal for displaying detailed graphics and videos with clarity. It delivers a brightness of up to 4600 ANSI lumens, ensuring that presentations remain vivid even in bright rooms. The contrast ratio of 5000:1 further enhances image quality, allowing for deeper blacks and brighter whites, which makes content more engaging.

On the other hand, the XG-C435X-L features a slightly lower brightness level of 4300 ANSI lumens while maintaining the same WXGA resolution. This makes it a suitable choice for users who need a dependable projector in slightly darker environments. The contrast ratio for this model is also impressive, at 4000:1, providing excellent image depth.

Both projectors utilize DLP (Digital Light Processing) technology, which is known for its reliability and vibrant color reproduction. This technology significantly reduces the chances of image distortion and offers sharp edges for text and graphics, making it perfect for detailed presentations. Additionally, the projectors come with a long-lasting lamp life of up to 5000 hours in eco mode, allowing for extended use without frequent replacements.

Connectivity options are another significant highlight of these projectors, as they support HDMI, VGA, and various audio inputs, ensuring compatibility with a range of devices such as laptops, Blu-ray players, and video conferencing systems. The inclusion of a USB port further adds versatility, allowing for presentations directly from USB drives without the need for a computer.

User-friendly features such as keystone correction and a flexible lens system make installation and setup straightforward, while the built-in speaker eliminates the need for external audio solutions in smaller setups. The lightweight design of both models makes transportation easy, a beneficial feature for users who frequently move between locations.

In summary, both the Sharp XG-C465X-L and XG-C435X-L projectors are built to meet the demands of various professional environments, offering high brightness, superb image quality, and versatile connectivity options. Their technological advancements and user-friendly features solidify their place as strong contenders in the projector market.