MOUSE/Adjustment buttons ('/"/\/)
BREAK TIMER button
AUTO SYNC | FREEZE | |
button | ||
button | ||
|
ECO+QUIET button
Displaying and Setting the Break Timer
1Press BREAK TIMER.
•The timer starts to count down from 5 min- utes.
2Press '/"/\/to adjust the length of the break time.
•Increases with ' or
5 minutes s6 minutes s60 minutes
•Shortens with \ or "
4 minutes s3 minutes s1 minute
•The break time can be set in units of one minute (up to 60 minutes).
Canceling the break timer display function
Press BREAK TIMER.
Note
•Break Timer does not function while the projec- tor is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.
Switching the Eco+Quiet Mode
Press ECO+QUIETto switch the Eco+Quiet mode between on and off.
•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consump- tion will decrease, and the lamp life will extend.
Note
•Refer to “Checking the Lamp Life Status” on page 53 for details of the Eco+Quiet mode.
Auto Sync
(Auto Sync Adjustment)
Auto Sync function works when detecting input signal after the projector turns on.
Press AUTO SYNC to manually adjust with Auto Sync function.
Note
•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 47.)
Freezing a Moving Image
1Press FREEZE.
•The projected image is frozen.
2Press FREEZE again to return to the moving image from the cur- rently connected device.
Basic Operation
-35
