Sharp XG-C465X-L, XG-C435X-L operation manual Connecting to a Monitor with RGB Input Terminal

Controlling the Projector by a Computer

When connecting to the LAN terminal using a LAN cable

HUB

or

Computer

TX/RX LED (yellow)

Illuminates when transmitting/receiving data.

LINK LED (green)

Illuminates when linked.

* To ensure safety, do not connect the LAN terminal with any cables such as a telephone line that may cause excessive voltage.

LAN cable (Category 5 type, commercially available)

To LAN terminal

Note

•When connecting to hub, use straight-through Category 5 (CAT.5) type cable (commercially available).

•When connecting to computer, use cross-over Category 5 (CAT.5) type cable (commercially available).

Connecting to a Monitor with RGB Input Terminal

You can display computer images on both the projector and a separate monitor using two sets of RGB cables.

Monitor

To RGB input terminal

Computer	Supplied	RGB cable
	accessory

To COMPUTER/
COMPONENT 1	To MONITOR OUT terminal
input terminal

To RGB output terminal

RGB cable

RGB cable (commercially available)

-28