Hitachi ED-A220N user manual Turning off the power

- + - +

STANDBY/ON button

POWER indicator

Turning off the power

1. Press the STANDBY/ON button on the projector or the remote control.

The message “Power off?” will appear on the screen for about 5 seconds.

2. Conrm that there is nothing that the lens door hits while closing. Press the

STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. The lens door will close right after

the lamp goes off.

However, to maintain better picture quality, the lens door will close after the lamp has been cooled down when the projector is installed upside down such as in ceiling mount installation. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.

Do not turn the projector on for about 10 minutes or more after turning it off. Also, do not turn the projector off shortly after turning it on. Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.

WARNING ►Be careful not to pinch your nger with the lens door, to

prevent an injury.

►Do not touch around the lamp cover and the exhaust vents during use or just

after use, since it is too hot.

►Remove the power cord for complete separation. The power outlet should be close to the projector and easily accessible.

NOTE • Please power off the projector after any connected devices are powered off.

•This projector has the AUTO POWER OFF function that can make the projector turn off automatically. For more information, please see the “Operating

Guide” in the CD.

14