OPTION menu

OPTION menu

From the OPTION menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.

Item

Description

Using the ▲/▼ buttons turns on/off the automatic signal search function.

ON Ù OFF

When the ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from

AUTO SEARCH the current port. Then when an input is found, the projector will stop searching and display the image.

COMPUTER IN1 Ö COMPUTER IN2 Ö LAN Ö USB TYPE A

VIDEO Õ S-VIDEO Õ HDMIÕ USB TYPE B

It may take several seconds to project the images from the USB TYPE B port.

 

Using the ▲/▼ buttons turns on/off the DIRECT POWER ON

 

function.

 

ON Ù OFF

 

When set to the ON, the lamp in projector will be automatically turned

DIRECT POWER

on without the usual procedure ( 18), only when the projector is

supplied with the power after the power was cut while the lamp was on.

ON

• This function does not work as long as the power has been

 

supplied to the projector while the lamp is off.

After turning the lamp on by the DIRECT POWER ON function, if neither input nor operation is detected for about 30 minutes, the

projector is turned off, even though the AUTO POWER OFF function (54) is disabled.

(continued on next page)

53

Page 62
Image 62
Hitachi ED-A220N user manual Option menu, Direct Power