Hitachi ED-A220N user manual Source Name

SCREEN menu

Item

Description

SOURCE NAME

Each input port for this projector can have a name applied to it.

(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button.

The SOURCE NAME menu will be displayed.

(2)Use the ▲/▼ buttons on the SOURCE

NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed.

Right side of the menu is blank until a name is specied.

(3)Select an icon you would like to assign to the port in the SOURCE NAME dialog. The name assigned to the port will also be automatically switched according to your icon selection. Press the ENTER or INPUT button to determine your icon selection.

(4)Select a number you would like to assign to the port along with the icon. You can select the number either from blank (no number assigned), 1, 2, 3, or 4. Then press the ENTER or INPUT button.

(5)If you would like to modify the name assigned to the port, select CUSTOM NAME and press the ENTER or INPUT button.

(continued on next page)

50