Hitachi ED-A220N user manual Selecting the network connection mode

1. Connection to the network

1.4 Selecting the network connection mode

After starting the “LiveViewer”, the “Select the Network Connection” screen comes up.

Select the network connection that you would like to use. There are 3 options in the menu.

•Wireless LAN

•Wired LAN

•My Connection

If you select either the wireless LAN or wired LAN, proceed to item 1.4.1 Selecting either the wireless LAN or wired LAN. (below)

If you select My Connection, jump to item 1.4.2 Selecting My Connection. (12)

NOTE • Select Wireless LAN only when you connect the computer and the access point via wireless network and connect the access point and the projector via wired network, since the projector doesn't have wireless LAN function.

1.4.1 Selecting either the wireless LAN or wired LAN

If you select either the wireless LAN or wired LAN, a list of the network adapters in your computer is shown in the menu.

Select what you like to use in the list, and click the [Next].

Then, proceed to item 1.5 Selecting the network connection method. (14)

NOTE • If you select the wireless LAN, the wireless LAN adapters in your computer are shown in the list.

• If the wired LAN is selected, the wired LAN adapters in your computer are shown.

[Troubleshooting]

„Are you sure that you want to turn on the network adapter?

The screen is displayed in the case that the selected network adapter is invalid.

•To turn it on, click the [Yes], and then proceed to item 1.5. (14)

•Not to turn it on, click the [No], and then the screen is back to the previous one to select another network adapter.

10