Hitachi ED-A220N user manual Logon

3. Web Control

3.1 Logon

To use the Web Control function, you need to logon with your user name and password. (47)

Refer to the following for conguring or controlling the projector via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Display the logon window as shown on the right. There are two options to display this window.

. Using the “LiveViewer”

Connect your computer and the projector via Network using the “LiveViewer”. (9)

Then click the Web Control button on the “LiveViewer” main menu (37) to start the Web browser software.

3 Using Web browser software

Make sure that your computer and the projector is connected via network, and then start Web browser.

Enter the projector's IP address into URL

input box of the Web browser as the example below, and then press the Enter key or button.

Example: If the IP address of the projector is set to 192.168.1.10: Enter “http://192.168.1.10/” into the address bar of the web browser and press the Enter key or click button.

2)Enter your user name and password, and then click the [OK].

NOTE • The language used on the Web Control screen is the same as that of the OSD on the projector. If you want to change it, you need to change the OSD language on the projector. (SCREEN menu in the User’s Manual – Operating Guide)

46