Hitachi ED-A220N Adjusting the position, Correcting the keystone distortions, Position button

Operating

Adjusting the position

1. Press the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT (42) dialog on screen.

2. Use the ▲, ▼, ◄ and ► buttons to adjust the picture position. Press the POSITION button again to nish this operation.

POSITIONMENU

ENTER

ESCRESET

POSITION button

●This is a function to shift the position of the shrunken picture by the D-ZOOM (42) function.

●When an OSD (On Screen Display) menu is displayed, this operation moves the position of the OSD menu, but the picture position is not (29).

●The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 256 (full screen).

Correcting the keystone distortions

1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion.

KEYSTONE button

VIDEO		MY SOURCE/
	COMPUTER DOC.CAMERA
ASPECT	AUTO	SEARCH	BLANK
MAGNIFY	FREEZE	PAGE	VOLUME
		UP

ON

2. Use the ▲/▼ cursor buttons to select MANUAL or PERFECT FIT operation, and press the ► button to perform the following.

(1)MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons to select KEYSTONE / KEYSTONE, then use the ◄/► buttons for adjustment.

(2)PERFECT FIT displays a dialog for adjusting the shape of the projected image in each of the corners and sides.

To close the dialog and complete this operation, press KEYSTONE button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

DOWN

OFF

KEYSTONE MY BUTTON MUTE

12

●The adjustable range of this function will vary among inputs. For some input, this function may not work well.

●This function will be unavailable when Transition Detector is on (74).

25