1. Connection to the network

1.8 Confirming the connection to your destination

1.8.1 Connection and transmission

When the network connection is established, the “Connection to Projector successful” screen is displayed.

Make sure that the right projector that you want to send your image to is selected, by checking the projector name and IP address shown in the screen.

To send images to the projector, click the [Yes]. The transmission will be started. To display the transmitted images, select the LAN port as input source on the projector.

Not to send, click the [No], then the “LiveViewer” main menu is displayed in stand-by mode. (Stand-by mode is the state where there is no image transmission, although the network connection is established.)

The transmission can be started, if you click or button on the “LiveViewer” main menu.

If you wish to use the current connection setting as a prole data for My Connection, check in the box for the [Register this setting to My Connection].

[Troubleshooting]

„This projector is currently in use (Presenting) by another user.

The projector you want to send your images to is occupied by another computer in the Presenter mode.

Click the [OK], then the “LiveViewer” main menu is displayed in stand-by mode. Retry to send your images, after the Presenter mode is off.

30

Page 143
Image 143
Hitachi ED-A220N user manual Confirming the connection to your destination, Connection and transmission