Hitachi ED-A220N Selecting the network connection method, Enter PassCode, Select From List

1. Connection to the network

1.5 Selecting the network connection method

There are some options to connect to the network.

•Enter PassCode

•Congure Manually

•Select From List

Select one of them to meet your requirement.

Enter PassCode

If you want to use the Passcode for network connection, select the [Enter PassCode] and click the [Next].

The Passcode is given by the projector on screen. And you simply input the Passcode to the “LiveViewer” to connect the network.

Proceed to item 1.5.1 Passcode connection. (15)

Configure Manually

Select the [Configure Manually] and click the [Next].

Then, proceed to item 1.6 Manual Configuration. (23)

Select From List

Before selecting this item, your computer and the projectors need to be connected to the same network.

If the connection is already established, select the [Select From List].

From the list of the projectors connected to the network, select which projector you would like to send your images. Proceed to 1.8 Confirming the connection

to your destination. (30)

14