Operating

Using the magnify feature

1. Press the MAGNIFY ON button on the remote control. The picture will be magnied, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the rst time after the projector is turned on, the picture will be zoomed by 1.5 times. On the dialog, triangle marks to show each direction will be displayed.

MAGNIFY ON/OFF button

VIDEO

 

MY SOURCE/

 

COMPUTER DOC.CAMERA

 

ASPECT

AUTO

SEARCH

BLANK

MAGNIFY

FREEZE

PAGE

VOLUME

 

 

UP

 

ON

DOWN

OFF

2. The display magnication of the projector switches in order with every press of the MAGNIFY button.

€For computer signals, HDMITM (RGB) signals, input signals from the LAN or USB TYPE B port

1.5times Æ 2 times Æ 3 times Æ 4 times Æ 1 time

€For video signals, s-video signals, component video signals or HDMITM (Component) signals

1.5times Æ 2 times Æ 1 time

3.While the triangles are displayed on the dialog, use the ///cursor buttons to shift the magnifying area.

4.Press the MAGNIFY OFF button on the remote control to exit magnication.

The MAGNIFY dialog will automatically disappear in several seconds with no operation. The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared.

The magnication is automatically disabled when the displaying signal or its display condition is changed.

While the magnication is active, the keystone distortion condition may vary. It will be restored when the magnication is disabled.

Some horizontal stripes might be visible on the image while magnication is active.

This function is not available in the following cases:

-The USB TYPE A port is selected as the input source.

-A sync signal in the range not supported is input.

-There is no input signal.

26

Page 35
Image 35
Hitachi ED-A220N user manual Using the magnify feature, Times Æ 2 times Æ 3 times Æ 4 times Æ 1 time, Magnify ON/OFF button