Hitachi ED-A220N user manual MY Text, Writing

SECURITY menu

Item	Description
	(1) Use the ▲/▼ buttons on the SECURITY menu to
	select the MY TEXT DISPLAY and press the ► or
	ENTER button to display the MY TEXT DISPLAY
	on/off menu.
	(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select
	on or off.
MY TEXT	ON Ù OFF
DISPLAY	When it is set ON, the MY TEXT will be displayed
	on the START UP screen and the INPUT_
	INFORMATION when the INFORMATION on the
	SERVICE menu is chosen.
	• This function is available only when the MY TEXT
	PASSWORD function is set to the OFF.
	(1) Use the ▲/▼ buttons on the
	SECURITY menu to select the MY
	TEXT WRITING and press the ►
	button. The MY TEXT WRITING dialog
	will be displayed.
	(2) The current MY TEXT will be displayed
	on the rst 3 lines. If not yet written, the
	lines will be blank.
	Use the ▲/▼/◄/► buttons and the
	ENTER or INPUT button to select and
	enter characters. To erase 1 character
	at one time, press the RESET button or
	press the ◄ and INPUT button at the
	same time. Also if you move the cursor
	to DELETE or ALL CLEAR on screen
MY TEXT	and press the ENTER or INPUT button,
	1 character or all characters will be
WRITING
	erased. The MY TEXT can be input up
	to 24 characters on each line.
	(3) To change an already inserted
	character, press the ▲/▼ button to
	move the cursor to one of the rst 3
	lines, and use the ◄/► buttons to
	move the cursor on the character to be
	changed.
	After pressing the ENTER or INPUT button, the character is selected.
	Then, follow the same procedure as described at the item (2) above.
	(4) To nish entering text, move the cursor to the OK on screen and press
	the ►, ENTER or INPUT button. To revert to the previous MY TEXT
	without saving changes, move the cursor to the CANCEL on screen and
	press the ◄, ENTER or INPUT button.
	• The MY TEXT WRITING function is available only when the MY TEXT
	PASSWORD function is set to OFF.

76