Hitachi ED-A220N user manual Confirming the connection to your Destination

1. Connection to the network

1.7 Conguring the network settings manually (continued)

If the entered IP address and projector's IP address are the same, a warning dialog shown to the right will be displayed.

Click the [OK], and then enter a different IP address from the projector's one in the dialog for changing Network conguration.

If the connection is not available with the entered Network conguration, a warning dialog shown to the right will be displayed. Click the [OK] to return to the dialog for changing the Network conguration, and then enter appropriate conguration.

NOTE • If a Network conguration to connect to the projector has been added on the computer, the added Network conguration will be erased once the application software is closed.

„Are you sure you want to connect the selected projector?

The message is appeared when the wireless adapter you selected is already used for another network connection.

•To connect, click the [Yes]. Proceed to item

1.8 Confirming the connection to your

destination. (30)

•Not to connect, click the [No] then the “LiveViewer” main menu is displayed even though the network is not established. Click on the main menu to go back

to item 1.5 Selecting the network connection method. (14)

29