4.My Image Function

4.My Image Function

The projector can display still images that are transferred via the network.

Transfer image data

Display image data ( 1 - 4 )

MY IMAGE transmission requires an exclusive application for your computer. Use the application to transfer the image data.

It can be downloaded from the Hitachi web site (http://www.hitachi-america.us/ digitalmedia or http://www.hitachidigitalmedia.com).

Refer to the manual for the application for instructions.

To display the transferred image, select the MY IMAGE item in the NETWORK menu. For more information, please see the description of the MY IMAGE item of the NETWORK menu. (NETWORK menu in User’s Manual – Operating Guide)

NOTE • It is possible to allocate the image le up to 4 in the maximum.

Using MY BUTTON that registered MY IMAGE can display transferred image. (OPTION menu in the User’s Manual – Operating Guide)

The image le also can be displayed by using schedule function from the web browser. Refer to item 7.3 Event Scheduling (81) in detail.

If you display MY IMAGE data on screen while you are using the USB Display function, the application for the USB Display will be closed. To restart the

application, exit the MY IMAGE function, and then the software in the projector, LiveViewerLiteUSB.exe, will run again. (USB Display in the User’s Manual

– Operating Guide)

70

Page 183
Image 183
Hitachi ED-A220N user manual My Image Function, Operating Guide