Hitachi ED-A220N user manual Connecting with your devices

Setting up

Connecting with your devices (continued)

NOTE • Before connecting the projector to a computer, consult the computer’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector.

-Some signal may need an adapter to input this projector.

-Some computers have multiple screen display modes that may include some signals which are not supported by this projector.

-Although the projector can display signals with resolution up to UXGA (1600X1200), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the

resolutions of the input signal and the projector panel are identical.

•If you connect this projector and a notebook computer, you need output the display to an external monitor, or output simultaneously to the internal display and an external monitor. Consult the computer's manual for the setting.

•Depending on the input signal, the automatic adjustment function of this

projector may take some time and not function correctly.

-Note that a composite sync signal or sync-on-green signal may confuse the automatic adjustment function of this projector (40).

-If the automatic adjustment function does not work correctly, you may not see the dialog to set the display resolution. In such a case, use an external display device. You may be able to see the dialog and set an appropriate display resolution.

(continued on next page)

11