Hitachi ED-A220N user manual Projector Management using Snmp, Snmp Settings

7. Other Functions

7.2 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.

NOTE • It is recommended that SNMP functions be carried out by a network administrator.

•SNMP management software must be installed on the computer to monitor the projector via SNMP.

SNMP Settings (51)

Congure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter your user name and password, and then click the [OK].

3)Click the [Port Settings] on the main menu.

4)Click the [DoZnload MIB file] to download a MIB le.

NOTE • To use the downloaded MIB le, specify the le by your SNMP manager.

5)Click the [Enable] check box to open the SNMP Port. Set the IP address to send the SNMP trap to when a Failure/Warning occurs.

NOTE • A Network Restart is required after the SNMP Port conguration settings have been changed. Click the [Network Restart] and congure the following items.

6)Click the [Security Settings] on the main menu.

7)Click the [SNMP] and set the community name on the screen that is displayed.

NOTE • A Network Restart is required after the Community name has been changed. Click the [Network Restart] and congure the following items.

8)Congure the settings for Trap transmission of Failures/Warnings. Click the

[Alert Settings] on the main menu and select the Failure/Warning item to be congured.

9)Click the [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear the [Enable] check box when SNMP trap transmission is not required.

10)Click the [Apply] button to save the settings.

80