5.Press touchpad (5) to change the setting
6.Deactivate the appliance to confirm.
SETTING THE TIME BEAM COLOUR
Nine colours are available for this light beam. You can change the colour or deactivate it.
1.Press the on/off button to activate the appliance.
2.Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’.
3.Press and hold touchpads (4) and
(5) at the same time until the indica-
ENGLISH 11
tors of touchpads (3), (4), (5) and (6) flash.
4.Press touchpad (6).
•The indicators of touchpads (3), (4) and (5) go off.
•The indicator of touchpad (6) continues to flash.
•The display shows a number and the letter C. Each number is rela- ted to a different colour (0C = Time Beam deactivated).
5.Press touchpad (6) again and again to change the colour.
6.Deactivate the appliance to confirm.
