10
OPTIONS
MULTITAB FUNCTION
Activate this function only when you use the combi detergent tablets. This function deactivates the flow of rinse aid and salt. The related indicators are off.
The programme duration can increase.
Activating the multitab function
Activate or deactivate the multi- tab function before the start of a programme. You cannot acti- vate or deactivate this function when a programme operates.
1.Press the on/off button to activate the appliance.
2.Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME'.
3.Press the multitab touchpad, the multitab indicator comes on.
The function stays on until you deactivate it. Press the multitab touchpad, the multitab indicator goes off.
If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps:
1.Deactivate the multitab function.
2.Set the water softener to the high- est level.
3.Make sure that the salt container and the rinse aid dispenser are full.
4.Start the shortest programme with a rinsing phase, without detergent and without dishes.
5.Adjust the water softener to the wa- ter hardness in your area.
6.Adjust the released quantity of rinse aid.
ÖKO PLUS
This function decreases the tempera- ture in the drying phase. The energy consumption decreases by 25%.
The dishes can be wet at the end of the programme. We recommend that you keep the door ajar and let the dishes dry.
EXTRAHYGIENE
This function gives better results for the hygiene. During the rinsing phase, the temperature stays at 70 °C for 10 to 14 minutes.
ACOUSTIC SIGNALS
The acoustic signals operate in these conditions:
•The programme is completed.
•The level of the water softener is ad- justed electronically.
•The appliance has a malfunction.
Factory setting: on. You can de- activate the acoustic signals.
Deactivating the acoustic signals
1.Press the on/off button to activate the appliance.
2.Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’.
3.Press and hold touchpads (4) and
(5) at the same time until the indica- tors of touchpads (3), (4), (5) and (6) flash.
4.Press touchpad (5),
•The indicators of touchpads (3), (4) and (6) go off.
•The indicator of touchpad (5) continues to flash.
•The display shows the setting of the acoustic signals.
On
Off
