20
THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY
Problem | Possible cause | Possible solution |
The dishes are not | The filters are clogged. | Clean the filters. |
clean. |
|
|
|
|
|
The filters are not correctly assembled and installed.
Make sure that the filters are correctly assembled and in- stalled.
The spray arms are clog- | Remove remaining soil with a |
ged. | thin pointed object. |
The programme was not | Make sure that the pro- |
applicable for the type of | gramme is applicable for the |
load and soil. | type of load and soil. |
Incorrect position of the | Make sure that the position |
items in the baskets. Water | of the items in the baskets is |
could not wash all items. | correct and that the water |
| can easily wash all items. |
|
|
The spray arms could not turn freely.
Make sure that the position of the items in the baskets is correct and does not cause the blockage of the spray arms.
The quantity of detergent | Make sure that you add the |
was not sufficient. | correct quantity of detergent |
| in the dispenser before you |
| start a programme. |
|
|
There was no detergent in the detergent dispenser.
Make sure that you add de- tergent in the dispenser be- fore you start a programme.
Limescale particles | The salt container is empty. Make sure that there is dish- |
on the dishes. | washer salt in the salt con- |
| tainer. |
|
|
The set level of the water softener is incorrect.
Make sure that the set level of the water softener agrees with the water hardness in your area.
| The cap of the salt contain- | Tighten the cap. |
| er is loose. |
|
Whitish streaks and | The released quantity of | Decrease the released quan- |
stains or bluish lay- | rinse aid is too much. | tity of rinse aid . |
ers on glasses and |
|
|
dishes. |
|
|
|
|
|
