2.Network Presentation

2.1Using the “LiveViewer” (continued)

$Presenter Mode

In the Single PC mode, the projector can be occupied by one computer and can block an access from any other computer, if the Presenter mode is selected in the “LiveViewer”.

While making your presentation, you don’t need to worry that the image on screen is unexpectedly switched to an image sent by another computer.

If you want to turn it on, put a check mark in the check box.

NOTE • If the Multi PC mode is selected, the setting for the Presenter mode is invalid.

When switching from the Multi PC mode to the Single PC mode, the Presenter mode setting of the computer is valid.

The Presenter Mode is set valid in factory default setting.

In addition to using the software menu on the computer on which Presenter Mode is turned on, you can cancel this function by using the projector's OSD menu QUIT PRESENTER MODE EXECUTE of the PRESENTATION item in the NETWORK menu.

/Display User Name

A “User Name” that is up to 20 letters can be input by using alphanumeric

characters.

The user name can be displayed on the projector screen, so you can nd out whose image is currently on the screen.

(Refer to NETWORK menu in the User’s Manual – Operating Guide) If the check box is not marked, the information is not sent to the projector.

42

Page 155
Image 155
Hitachi ED-A220N user manual $ Presenter Mode, Display User Name