Hitachi ED-A220N Network Settings, Displays and congures network settings, Dhcp on, Dhcp OFF

3. Web Control

3.3 Network Settings

Displays and congures network settings.

		Item	Description
IP Configuration			Congures network settings.
	DHCP ON		Enables DHCP.
	DHCP OFF		Disables DHCP.
		IP Address	Congures the IP address when DHCP is disabled.
		Subnet Mask	Congures the subnet mask when DHCP is disabled.
		Default Gateway	Congures the default gateway when DHCP is disabled.
			Congures the name of the projector.
			The length of the Projector Name can be up to 64 alphanumeric
Projector Name			characters. Only alphabets, numbers and following symbols
			can be used. !"#$%&'()*+,-./:;<=>?@[\]^_`{}~ and space.
			Particular projector name is pre-assigned by default.
			Congures the location to be referred to when using SNMP.
sysLocation (SNMP)			The length of the sysLocation can be up to 255 alphanumeric
			characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
			Congures the contact information to be referred to when
sysContact (SNMP)			using SNMP.
			The length of the sysContact can be up to 255 alphanumeric
			characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
DNS Server Address			Congures the DNS server address.
			Congures the AMX Device Discovery setting to detect the projector
AMX D.D.			from the controllers of AMX connected to the same network. For the
(AMX Device Discovery)			details of AMX Device Discovery, visit the AMX web site.
			URL: http://www.amx.com

Click the [Apply] button to save the settings.

NOTE • The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. You can restart the network connection by clicking the [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

49