Extron electronic 450 Plus Series manual Create or delete a tie, RGB and Audio Settings

Create or delete a tie

Make or break a tie as follows:

1.	Click the Video Only, Audio Only, or Video & Audio button to select video,
	audio, or both for switching (audio follow or audio breakaway). Each mouse
	click on a button toggles the other two buttons off.
2.	Move the mouse over the matrix of input and output selection buttons. Click
	a button to:
	• Create a preliminary tie (if not tied) of the input and output associated
		with that button.
	• Create a preliminary untie (if tied) of the input and output associated
		with that button.
	A “P” (for preliminary) appears in the button.
		If you lose track of the input and output associated with a specific button, let
		the mouse rest over one of the tie buttons for a moment. A field pops up (as
		shown on figure 6-10) that identifies the input and output for that button.
		To tie an input to all outputs, click that input’s input number.
3.	Click the Take button to make the configuration changes or Cancel button to
	abandon the configuration changes.

RGB and Audio Settings page

The RGB and Audio Settings page provides a way to set the input audio gain and attenuation, set the output volume, mute and unmute all video and audio outputs, and (for CrossPoint 450 Plus switchers only) set the RGB delay (switching interval). Access the RGB and Audio Settings page (figure 6-11) by clicking the RGB & Audio Settings link on the Control page.

Select Set & View Ties.

Refresh.

Select Global Presets.

Figure 6-11 — RGB and Audio Settings page

CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation 6-13