Extron electronic 450 Plus Series manual Example 8 Recalling a preset

Example 8: Recalling a preset

The following steps show an example in which a preset is recalled to become the current configuration. The steps show the front panel indications that result from your action.

1. Press and release the Esc button (figure 3-47).

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button flashes once.

Figure 3-47 — Clear all selections

2.	Press and release the Preset button (figure 3-48).
						Red
		Press and release the		(Preset Assigned)
		Preset button.
		The Preset button lights.									I
					1		2	3	15	16
											N
		PRESET									P
											U
			All input buttons with		17		18	19	31	32	T
			assigned presets light red.								S
								Unlit
							(No Preset Assigned)
Figure 3-48 — Enter Recall Preset mode
3.	Press and release the input or output button for the desired preset
	(figure 3-49).

Press and release the Input 1 button.

The button blinks red to indicate that this							C O N T R O L
preset number is selected but not recalled.								VIEW	ESC
							ENTER PRESET
1	2	3	4	15	16	I
						N	The Enter button blinks
						P
							to indicate the need to
						U
							recall the preset.
17	18	19	20	31	32	ST

= Blinking button

Figure 3-49 — Select the preset

Figure 3-42 on page 3-29 shows the presets associated with the various input and output buttons for all three front panel configurations.

CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-31