Extron electronic 450 Plus Series manual Update firmware, Location of firmware upgrade files

The radio buttons and check boxes associated with each address field permit the administrator to specify specific e-mail requirements for each recipient.

Edit these fields and controls as follows:

1.	Click in the desired E-mail Addressee field. The graphic cursor becomes a
	text cursor.
2.	Edit the e-mail address as desired. Standard e-mail address conventions
	(for example: nnnnn@xxx.com) apply.
3.	Press the Tab key on the keyboard or click in another field to exit the e-mail
	addressee field.
4.	In the square check boxes associated with each addressee, select the options
	about which the addressee is to be e-mailed: missing input(s), fans, and/or
	power supply. In the floating box that contains the input numbers, select the
	inputs that need monitoring.
5.	In the round radio buttons associated with each addressee, select whether the
	addressee is to be e-mailed of failures, fixes, both, or not be notified.
	The None radio button is useful for temporarily removing personnel from the
	e-mail list when they are unavailable, such as on travel or vacation.
6.	If desired, click on the Send test E-mailbutton to test the e-mail function.
7.	Click on the Take button to make the e-mail address changes take affect.

Update firmware

The firmware upgrade utility provides a way to replace the firmware that is coded on the switcher’s control board without taking the switcher out of service.

The Firmware Loader must be installed on your computer to perform this operation. Extron recommends that you install this program when you install the Matrix Switchers Control Program. If you did not, it can be downloaded from the Extron Web site, www.extron.com, and installed separately.

The update firmware utility is for replacing the firmware that controls all switcher operation. This is not the page to insert your own HTML pages. See “Upload HTML files” to insert custom HTML pages.

Update the switcher firmware as follows:

1. Visit the Extron web site, www.extron.com, click the Download Center tab, and then click the Firmware link (figure 5-9). Select the appropriate firmware file to download and copy it to your computer. Note the folder to which you save the firmware file.

Figure 5-9 — Location of firmware upgrade files

2. In the Windows Explorer or other file browser, double-click the downloaded executable (*.exe) file) to self-extract the firmware file.

CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software 5-13