Extron electronic 450 Plus Series manual Video MAV Plus switchers only

Installation, cont’d

Video (MAV Plus switchers only)

Video input and output connections are made with female BNC connectors. Some video input and output devices do not have BNC video output connectors. For these cases, a suitable cable or connector adapter is necessary. The part number for the Extron RCA-to-BNC adapter is 10-229-01.

The connectors for each video plane are grouped together (for example, for component/HDTV switchers, all of the Y inputs grouped together, all of the R-Y inputs grouped, and so on). Ensure that you connect the input on each video plane to the corresponding connector in the correct group (figure 2-12, through figure 2-14, below and on the next page).

The switcher can connect to up to as many as 32 S-video or composite video or up to 16 component/HDTV video, S-video, or composite video sources, depending on the model. The switcher can output to as many as 32 S-video or composite video or up to 16 component video, S-video, or composite video devices, depending on the model.

1

2

Video inputs — Connect component/HDTV video (figure 2-12),

S-video (figure 2-13), or composite video (figure 2-14) inputs, as applicable, to these BNC connectors for each input.

Video outputs — Connect component/HDTV video (figure 2-12),

S-video (figure 2-13), or composite video (figure 2-14) displays, as applicable, or other devices to these BNC connectors for each output. Figure 2-14 shows how to connect the various video formats to each MAV Plus configuration.

The S-video (figure 2-13) and composite video (figure 2-14) connection drawings are all on the next page.

Y INPUTS

17

28

R-Y INPUTS

17

28

B-Y INPUTS

17

28

1

MAV Plus 88, 128 HDA and HD Composite/HDTV video

MAV Plus 816, 168, 1616

HDA and HD

Component/HDTV video

Figure 2-12 — MAV Plus component/HDTV video connections

2-10 CrossPoint 450 Plus and MAV Plus Switchers • Installation