Extron electronic 450 Plus Series manual Command/response table for SIS commands

Programmer’s Guide, cont’d

Command/response table for SIS commands

Command	ASCII Command	Response	Additional description
	(host to switcher)	(switcher to host)
Create ties

• Commands can be made back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*24$.

•The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.

•The CrossPoint 450 Plus and MAV Plus support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).

Tie input X2 to output and audio (A)

Example:

Tie input X2 to output Example (see Note):

Tie input X2 to output Example (see Note):

X3

, video (V)

X2

*

X3

!

Out

X3

•In

X2

•All

Tie input

X2

’s video and audio

to output

.

X3

1*3!

Out03 •In01•All

Tie input 1 V & A to output 3.

, RGBHV only

*

&

Out

•In

RGB

Audio breakaway.

X3

X2

X3

X3

X2

10*4&

Out04•In10•RGB

Tie input 10 RGB to output 4.

, video only

*

%

Out

•In

•Vid

Audio breakaway.

X3

X2

X3

X3

X2

7*5%

Out05•In07•Vid

Tie input 7 video to output 5.

The & tie command for RGB and the % tie command for video can be used interchangeably on the CrossPoint 450 Plus and MAV Plus switchers.

Tie input X2 to output Example:

Quick multiple tie

Example:

X3	, audio only	X2	*	X3	$	Out	X3	•In	X2	•Aud	Audio breakaway.
12*24$						Out24•In12•Aud					Tie input 12 audio to output 24.

Esc +Q X2 * X3 !… X2 * X3 !

Qik

Esc +Q3*4!3*5%3*6$ QikTie input 3 video and audio to output 4, tie input 3 video to output 5, and tie input 3 audio to output 6.

Tie input to all outputs, V & A		X2	*!	In	X2	•All
Example:	5*!			In05•All			Tie input 5 video and audio to all
							outputs.
Tie input to all outputs, RGBHV only		X2	*&	In	X2	•RGB
Example (see Note):	28*&			In28•RGB			Tie input 28 RGB to all outputs.
Tie input to all outputs, video only			*%	In		•Vid
		X2			X2
Example (see Note) :	14*%			In14•Vid			Tie input 14 video to all outputs.

The & tie all command for RGB and the % tie all command for video can be used interchangeably on the CrossPoint 450 Plus and MAV Plus switchers.

Tie input to all outputs, audio only		X2	*$	In	X2	•Aud
Example:	1*$			In01•Aud			Tie input 1 audio to all outputs.

Read ties

Read RGBHV output tie

Read video output tie

X3 &

X3 %

X2	RGBHV input
			.
		X3
	Video input
X2				X2

X2 tied to output

tied to output X3 .

The & read tie command for RGB and the % read tie command for video can be used interchangeably on the CrossPoint 450 Plus and MAV Plus switchers.

Read audio output tie

X3 $

X2 Audio input

X2

tied to output

X3 .

Digital Sync Validation Processing (DSVP)

List individual sync frequency			LS		,		Listed as H freq., V freq.
		X1		X15		X15
Example:	2LS			031.50,060.00			Input 2 frequency is 31.5 kHz
							horizontal and 60 Hz vertical.

The matrix switcher returns 000.00,000.00 if there is no connection or sync frequencies are not applicable.

4-8 CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide