Extron electronic 450 Plus Series Use Daylight Savings checkbox, Administrator Password field

Use Daylight Savings checkbox

Click in the Use Daylight Savings checkbox. When Daylight Savings Time is turned on, the switcher automatically updates its internal clock between Standard Time and Daylight Savings Time in the spring and fall on the date that the time change occurs in the country or region selected. When Daylight Savings Time is turned off, the switcher does not adjust its time reference.

Administrator Password field

The Administrator Password field displays the password required to log on to the CrossPoint 450 Plus or MAV Plus switcher via the Ethernet port with all of the administrator’s rights and privileges. Passwords are case sensitive and are limited to 12 upper case and lower case alphanumeric characters.

While you are logged on as a user, this field is masked with asterisks (************) as a security measure.

		Editing the Administrator Password field while connected via the Ethernet
		port can immediately disconnect the user from the switcher. Extron
		recommends editing this field using a serial port and protecting the Ethernet
		access to this screen by assigning an administrator’s password to qualified and
		knowledgeable personnel only.
		The following characters are invalid in passwords: {space} + ~ , @ = ‘ [ ]
		{ } < > ’ “ ; : \ and ?.
Edit this field as follows:
1.	Click in the Administrator Password field. The graphic cursor becomes a text
	cursor.
2.	Edit the case-sensitive password as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the
	Administrator Password field.
4.	Click the Take button to make the password change take affect.

User Password field

The User Password field displays the password required to log on to the CrossPoint 450 Plus or MAV Plus switcher via the Ethernet port as a user, without all of the administrator’s rights and privileges. Passwords are case sensitive and are limited to 12 upper case and lower case alphanumeric characters.

While you are logged on as a user, this field is masked with asterisks (************) as a security measure.

		An administrator password must be created before a user password can be
		created.
		The following characters are invalid in passwords: {space} + ~ , @ = ‘ [ ]
		{ } < > ’ “ ; : \ and ?.
Edit this field as follows:
1.	Click in the User Password field. The graphic cursor becomes a text cursor.
2.	Edit the case-sensitive password as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the User
	Password field.
4.	Click the Take button to make the password change take affect.

CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software 5-11