Extron electronic 450 Plus Series Command/Response Table for SIS Commands, Symbol Definitions

Command/Response Table for SIS Commands

Symbol Definitions:

= Carriage return/line feed

= Carriage return (no line feed)

•= Space

Esc

X1

X2

X3

X4

X5

X6

X7

X8

X9

X10

X11

X12

X13

X14

X15

X16

= Escape key

Input and output numbers in commands may be entered as either 1-digit, 2-digit, or 3-digit numbers. All input and output numbers are reported as 2-digit numbers in the response.

= Input number	01 – (maximum number of inputs for your model)
= Input number (for tie)	00 – (maximum number of inputs) (00 = untied)
= Output number	01 – (maximum number of outputs for your model)
= Numeric dB value	–18 to +24 (45 steps of gain or attenuation)
= Audio gain	0 – 24	(1 dB/step)
= Audio attenuation	1 – 18	(1 dB/step)
= Volume adjustment range	0 – 64	(1 dB/step except for 0-to-1, which is 13 dB)
= Room # (for room presets)	10 max. (each can have up to 10 presets ( X12 s) assigned)

A Room is a subset of operator-selec ted outputs that relate to each other. The CrossPoint 450 Plus or MAV Plus switcher supports up to 10 rooms, each of which can consist of from 1 to 16 outputs.

= Mute, Lock mode, power supply	(0 = off/mode 0/not Ok, 1 = on/mode 1/Ok, 2 = mode 2)
= Group # (for I/O grouping)	1 through 4 groups (0 = no group)
= Global preset #	0, 01-32 maximum (0 = current configuration)
= Room preset #	10 maximum (0 = current configuration for room)

A Room preset is a stored configuration with all of the outputs assigned to a single room. When a room preset is retrieved from memory, it becomes the current configuration.

= RGB delay interval	Delay in ½ second increments (10 maximum)
= Video/audio mute:	0	= no mutes
	1	= video mute
	2	= audio mute
	3	= video and audio mute
= Sync frequency	xxx.xx (frequency in Hz (V) or kHz (H))
= Connection status	0 = no input connected
	1	= input connected

X17

X18

X19

X20

X21

X22

=Firmware version number to second decimal place (x.xx)

=Verbose firmware version-description-upload date/time. See page 4-16.

= Name		12 characters maximum for input, output, global preset,
		and room preset names.
		11 characters maximum for room names.
		Upper- and lower-case alphanumeric characters and
		_ / and spaces are valid.
	The following characters are invalid in the name: {space} ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.
= Voltage		Positive or negative voltage and magnitude
= Temperature		Degrees Fahrenheit
= Fan speed		RPM

CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide 4-7