Extron electronic 450 Plus Series Example 3 Removing a tie from a set of video and audio ties

Example 3: Removing a tie from a set of video and audio ties

In the following example, an existing audio tie is removed from the current configuration. The steps show the front panel indications that result from your action.

This example assumes that you have performed example 1 and example 2.

1. Press and release the Esc button (figure 3-17).

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button flashes once.

Figure 3-17 — Clear all selections

2. To select audio only for the tie, if necessary, press and release the RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus switchers) button and the Audio button (figure 3-18).

I / O

RGBHV AUDIO

Press the RGBHV/Videobutton to toggle on and off.

The button is unlit or background illuminated when deselected.

Press the Audio button to toggle on and off.

The button lights red when selected.

Figure 3-18 — Select audio only

3. Press and release the input 5 button (figure 3-19).

Press and release the Input 5 button.

The button lights red (matrix sizes up to 1616) or green (matrix sizes 2412 through 3232).

1 2 3 4 5 6 7 8 16

17 18 19 20 21 22 23 24 32

I

N P U T S

The Output 3, Output 4, and Output 8 buttons light red to indicate the audio ties created in example 1.

1 2 3 4 5 6 7 8 16

17 18 19 20 21 22 23 24 32

O U T P U T S

The Output 1 button does not light to indicate the tie created in example 2 because that tie is RGBHV or video only.

Figure 3-19 — Select an input

CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-15