Extron electronic 450 Plus Series manual 3 4 5 6 7 8 15 16 N 17 18 19 20 21 22 23 24 31 32 ST

2. Press and hold the RGBHV button for approximately 2 seconds (figure 3-38).

Press and hold the RGBHV button until it blinks.

RGBHV 2 seconds

RGBHV

Figure 3-38 — Select RGB Delay mode

3. Press and release the output 17 button (figure 3-39).

1 2 16

Press and release the	17 18	32
Output 17 button.
The button lights green.

O U T P U T S

The input buttons 1 through 10 display the selected output's RGB delay.

Each lit input button indicates half a second of delay.

In this example, the green input buttons display 3.5 seconds of RGB delay.

0.5 1.0 1.5 2.0 2.5 3.0 3.5

I

1 2 3 4 5 6 7 8 15 16 N

P

U

17 18 19 20 21 22 23 24 31 32 ST

= Unlit button

= Lit green button

Figure 3-39 — Select an output

The RGB delay is protected when front panel lock mode 2 is selected. You can view the delay in lock mode 2, but not change it from the front panel.

If front panel lock mode 2 is selected and you try to perform steps 4, the actions are ignored and the Enter, RGBHV/Video, and Audio buttons flash.

4.	Press and release the Esc ( ) button once (figure 3-40) to increase the RGB
	delay by a half second.

Press and release the Esc () button twice more to increase the RGB delay by a whole second. Note the input button indication changes that occur each time the Esc () button is pressed and released.

Figure 3-40 show the result of pressing the Esc () button a total of 3 times.

Press the Esc button to increase the RGB interval that is applied to switches to the selected output by a half second per button push.

ESC ESC ESC

Input buttons 1 through 10 display the selected output's RGB delay. Each lit input button indicates half a second of delay.

In this example, the green input buttons display 5.0 seconds of RGB interval.

0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

1	2	3	4	5	6	7	8	9	10	I
										N
										P
										U
17	18	19	20	21	22	23	24	25	26	T
										S
	= Unlit button				= Lit green button

Figure 3-40 — Adjust the RGB delay interval

CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-27