Extron electronic 450 Plus Series manual 3 15 16 N 17 18 19 31 32 ST

Operation, cont’d

2.	Press and hold the Preset button for approximately 2 seconds until it blinks
	(figure 3-44).

Press and hold the Preset button until it blinks.

PRESET		PRESET
	2 seconds		All input buttons with assigned
			presets light red.
			If you then save the configuration
			to a lit preset number, the configuration
			data at that preset location
			will be overwritten.

Red

(Preset Assigned)

I

1 2 3 15 16 N

P

U

17 18 19 31 32 ST

Unlit

(No Preset Assigned)

Figure 3-44 — Enter Save Preset mode

3. Press and release the input or output button for the desired preset (figure 3-45).

C O N T R O L

Press and release the Input 1 button.

•The button blinks red to indicate that this preset number is selected but not saved.

1	2	3	4	5	6	7	8	15 16	I
									N
									P
									U
17	18	19	20	21	22	23	24	31 32	ST

ENTER PRESET VIEW ESC

•The Enter button blinks to indicate the need to save the preset.

•The Preset button continues to blink.

Figure 3-45 — Select the preset

Figure 3-42 on page 3-29 shows the presets associated with the various input and output buttons for all three front panel configurations.

4. Press and release the Enter button (figure 3-46). The current configuration is now stored in the selected memory location.

Press the Enter button to save the preset.

C O N T R O L

ENTER PRESET VIEW ESC

The Enter and Preset buttons return to unlit or background illumination.

All input buttons return to unlit or background illumination.

Figure 3-46 — Press the Enter button

3-30 CrossPoint 450 Plus and MAV Plus Switchers • Operation