Extron electronic 450 Plus Series manual Assign inputs and outputs

Operation, cont’d

		I/O groups are protected when front panel lock mode 2 is selected. You can
		view the groups in lock mode 2, but not change them from the front panel.
		If front panel lock mode 2 is selected and you try to perform steps 4 through 6,
		the actions are ignored and the Enter, RGBHV/Video, and Audio buttons flash.
4.	Press and release the input 1 through 4 and output 1 through 4 buttons
	(figure 3-33).

Press and release the Input 1 through Input 4 buttons.

The selected buttons light green.

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

I

N P U T S

Press and release the Output 1 through Output 4 buttons. The selected buttons light green.

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

O U T P U T S

Figure 3-33 — Assign inputs and outputs

5. Press and release the Preset button to select group 2 (figure 3-34).

Press and release the Preset button to select group 2.

The button lights amber to indicate the selection.

C O N T R O L

ENTER PRESET VIEW ESC

Group # 1 2 3 4

Figure 3-34 — Select an I/O group

3-24 CrossPoint 450 Plus and MAV Plus Switchers • Operation