Hitachi ED-A220N user manual Messenger Function

5. Messenger Function

5. Messenger Function (Continued)

Congure the following items from a web browser when Messenger function is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter "http://192.168.1.10/" into the address bar of the web browser.

2)Enter your user name and password, and then click the [OK].

3)Click the [Port Settings] on the main menu.

4)Click the [Enable] check box to open the Messenger Port (Port: 9719). Click the [Enable] check box for the [Authentication] setting when authentication is required, otherwise clear the check box.

5)Click the [Apply] button to save the settings.

When the authentication setting is enabled, the following settings are required.

6)Click the [Security Settings] on the main menu.

7)Select the [Network Control] and enter the desired authentication password.

8)Click the [Apply] button to save the settings.

NOTE • The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port: 4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).

•The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. You can restart the network connection by clicking the [Network Restart] on the main menu.

73