Hitachi ED-A220N user manual Outline of Profile data, Making Profile data

1. Connection to the network

1.9 Profile data

1.9.1 Outline of Profile data

The network setting to connect the projector and computer can be stored as a prole data. Once the data is stored, all you need to do is to select the data to connect to the network. It is recommended when the same network connection is often used.

1.9.2 Making Profile data

The prole data is made on the Manual Conguration screen. (23)

Up to 10 prole data can be stored for each network adapter.

1)Select the [Profile] and click the [New].

2)The “Create new prole” will come up.

If you have already made 10 prole data, you cannot make a new one, until you delete a stored data.

Input all information required for your network connection.

If you want to clear the information you input, click the [Clear].

3)Click the [OK], after all information is set.

If you don’t want to store it, click the [Cancel].

4)The new prole data is shown in the prole list, if you click the [OK].

NOTE • When you make a new prole data, it is strongly recommended to check that the new data can work properly by selecting the data at the Prole connection. (23)

•If you change a network adapter on your computer, make a new prole data for the adapter.

33