Hitachi ED-A220N user manual Alert Settings, Displays and congures failure & alert settings

3. Web Control

3.6 Alert Settings

Displays and congures failure & alert settings.

Item	Description
Cover Error	The lamp cover has not been properly xed.
Fan Error	The cooling fan is not operating.
Lamp Error	The lamp does not light, and there is a possibility that interior
	portion has become heated.
Temp Error	There is a possibility that the interior portion has become
	heated.
Lens Door Error	The lens door is not opened or closed properly.
Air Flow Error	The internal temperature is rising.
Cold Error	There is a possibility that the interior portion has become
	overcooled.
Filter Error	Filter time over.
Other Error	Other error.
	If displaying this error, please contact your dealer.
Schedule Execution	Schedule Execution error. (	55)
Error
Lamp Time Alarm	Lamp time over Alarm Time setting.
Filter Time Alarm	Filter time over Alarm Time setting.
Transition Detector	Transition Detector Alarm. (	SECURITY menu in the
Alarm	User’s Manual – Operating Guide)
	When the projector is supplied with the power, it works as
	below.
Cold Start	• If the STANDBY MODE is set to the NORMAL:the projector's
	power status changes from “OFF” to “Standby state”.
	• If the STANDBY MODE is set to the SAVING:the projector's power
	status changes from “Standby state” to “ON (lamp is turned on)”.
	( SETUP menu in the User’s Manual – Operating Guide)
Authentication Failure	The SNMP access is detected from the invalid SNMP community.

Refer to “Troubleshooting” in the User’s Manual – Operating Guide for further detailed explanation of Error except Other Error and Schedule Execution Error.

53