Hitachi ED-A220N Adjusting the projectors elevator, Operation, Displaying and switching the image

Adjusting the projector's elevator

The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.

Front foot Rear foot

Spacer

2.3~4.3°

Front foot	Spacer (Large)
		-1~1°
	Rear foot	Spacer (Small)

WARNING ►Keep the spacers away from children and pets. Be careful not to let them swallow the spacers. If swallowed consult a physician immediately for emergency treatment.

NOTE • The adjustment angle can be adjusted up to plus or minus 1° each of Front and Rear foot.

•After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.

Install Large on the Front foot and Small on the Rear foot of the spacer. If change the setting place of the projector, it will recommend keep and reuse the spacers.

Operation

INPUT button

FOCUS - button

FOCUS + button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE	VOLUME
UP

ON

DOWN

OFF

KEYSTONE MY BUTTON MUTE

12

-	FOCUS	+		D-ZOOM	+
			-

COMPUTER button VIDEO button

POSITIONMENU

ENTER

ESCRESET

Displaying and switching the image

Press the INPUT button on the projector. Each time you press the button, the projector switches its input port in turn. You can also use the remote control to select an input signal. Press the VIDEO button for selecting an input signal from the HDMI, S-VIDEOor VIDEO port, or the COMPUTER button for selecting an input signal from the COMPUTER IN1, COMPUTER IN2, LAN, USB TYPE A or USB TYPE B port.

12