Hitachi ED-A220N user manual Process to connect the network, Process overview

1. Connection to the network

1.3 Process to connect the network

Before connecting your computer and projector via a network, make sure that the LAN port is selected as the input source on the projector. (Operating in the User’s Manual – Operating Guide) Otherwise a connection cannot be established.

1.3.1 Process overview

An overview of the process to connect your computer and the projector via a network is shown below.

The “LiveViewer” allows you to skip some of the steps below to establish a network connection quickly and easily.

.Selecting the network connection mode

-Wireless LAN

-Wired LAN

-My Connection

3 Selecting the network connection method

-Enter PassCode

-Congure Manually

-Select From List

$Manual conguration

-Prole

-History

-Congure Network Settings Manually

If My Connection is selected

If Enter PassCode or Select From List is selected

If Prole or History is selected

/Conguring the network settings manually

1 Conrming the connection to your destination

NOTE • Wireless LAN can be selected only when an access point to convert wireless LAN to wired LAN exists between your computer and the projector.

•Up to 30 computers can be simultaneously connected to the projector through a network.

8