Euro-Pro IR4005 Technical Specifications, HOW to Replace the ANTI-CALC Cassette, Storage

GETTING TO KNOW YOUR STEAM STATION IRON

USER MAINTENANCE INSTRUCTIONS

Before using your Steam Station Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron.

When turned on for the first time, your new iron may emit an odor for up to 10 minutes. This is due to the initial heating of the materials used in making the iron.

1.	Temperature Control Dial (Rotate Dial)
2.	Steam Button
3.	Temperature Pilot Light
4.	Iron Stand
5.	Water Tank
6.	Water Filling Hole
7.	Rubber Mat
8.	Power Cord

The odor is safe and should not reoccur after initial heating.

Also, before ironing with steam for the first time, allow iron to heat, hold in a horizontal position and hit the steam button several times. The iron may emit some small particles from the steam holes. This is normal and will clear after pressing the steam button several times.

Cleaning the Iron

1.Unplug the steam station from the electrical outlet

2.When finished using the iron, turn the temperature control dial to “MIN”.

3.Allow the iron to cool down before cleaning.

4.Scale and other deposits can be wiped off the soleplate with a damp cloth and some non-scratching (fluid) abrasive.

5.Keep the soleplate smooth, avoid hard contact with metal objects.

6.From time to time, clean the inside of the water tank by filling with water and shaking.

Storage

•Remove the power cord from the wall outlet.

•Pour any remaining water out of the water tank.

•Set the steam control to position “0”.

•Put the iron on the rubber mat on its stand and let cool down sufficiently before you store it.

•Regularly check if the power cord is still in a good and safe condition.

9.	Connecting Hose/Supply Hose
10.	Anti-Calc Cassette
11.	Water Tank Lock
12.	Pump “On” Light

Technical Specifications

Voltage:	120V., 60Hz.
Power:	1400 Watts

HOW TO REPLACE THE “ANTI-CALC” CASSETTE

•The “Anti-Calc” cassette should be replaced after 9-12 months of usage depending on the amount of usage and water hardness.

•Rotate and release the head of the cassette, then take it out.

•Empty the water from the water tank and cassette housing.

•Fill the water tank with water.

•Insert the new cassette and lock it into the water filling hole.

•Push steam button for about one minute. The new cassette is now filled with water.

•You can resume ironing.

To order additional “Anti-Calc” cassettes or for customer service:

Call Customer Service

In US.: 800-798-7398

Monday to Friday 8:30 AM – 5:00 PM Eastern Standard Time

or visit our website at: www.euro-pro.com

3

8