Troubleshooting

Related messages (continued)

Message

Description

The internal temperature is rising.

Please turn the power off, and allow the projector to cool down at least 20 minutes. After having conrmed the following items, please turn the power ON again.

Is there blockage of the air passage aperture?

Is the air lter dirty?

Does the peripheral temperature exceed 35°C?

Is the projector used at an altitude of about 1600 m or higher? If the projector is used at an altitude of about 1600 m or

higher, set FAN SPEED of the SERVICE item in the OPTION menu to HIGH (58).

A note of precaution Zhen cleaning the air filter.

Please immediately turn the power off, and clean or change the air lter referring to the “Cleaning and replacing the air lter” section of this manual. After you have cleaned or

changed the air lter, please be sure to reset the lter timer (55, 92).

The button operation is not available.

97

Page 106
Image 106
Hitachi ED-A220N user manual Related messages, Internal temperature is rising, Button operation is not available