2.Network Presentation

2.1Using the “LiveViewer” (continued)

2.1.3 Switching the display mode

The “LiveViewer” has the Single PC mode and Multi PC mode. The modes can be switched on the main menu.

1)Click the button on the main menu. The buttons below are displayed.

. 3 $ / 1 4

4:Status Display

2)Select from . to 1 buttons, and click it.

. Switching to the Single PC mode : Your image is displayed on full screen.

3-1 Switching to the Multi PC mode : Your image is displayed on a quarter

screen identied in the button.

3)The projector screen is switched to the mode selected above, and the transmission of your computer image will be started to display your image on the screen.

4)The icon on the main menu is replaced by the icon you selected.

NOTE • The image transmission will be stopped, when you click the Single mode button while the projector is in the Single PC mode or you click one of the Multi mode buttons that shows the quarter screen which is currently displaying your computer images in the Multi PC mode.

If the Multi PC mode is selected, the projector screen is automatically divided to 4 zones.

When the Presenter mode is enabled and the projector is used by a computer in the Single PC mode, images from other computers cannot be sent to the projector even if the button is pressed.

When a quarter-screen occupied by another computer is selected, image

transmission from that computer will be put on hold and the image of the currently specied computer will be displayed.

The display mode can be set also by using the MULTI PC MODE in the PRESENTATION item in the NETWORK menu. The last setting made will take effect regardless of the setting method.

(Refer to NETWORK menu in the User’s Manual – Operating Guide for the function on the projector.)

40

Page 153
Image 153
Hitachi ED-A220N user manual Switching the display mode