Network Bridge Communication

Network Bridge Communication

This projector is equipped with NETWORK BRIDGE function.

When the projector connects to the computer by LAN communicaton, an external device that is connected with this projector by RS-232C communication can be controlled from the computer as a network terminal.

For details, see the 6. Network Bridge Function - Network Guide.

Connection

1. Connectcable. the computer's LAN port and the projector's LAN port with a LAN 2. Connect the projector's CONTROL port and the RS-232C port of the

devices that you want to control with a RS-232C cable.

3. Turnon. the computer on, and after the computer has started up turn the projector

Set the COMMUNICATION TYPE to NETWORK BRIDGE. (OPTION menu -

4. SERVICE - COMMUNICATION in the User's Manual - Operating Guide)

LAN

LAN

CONTROLRS-232C

15

Page 220
Image 220
Hitachi ED-A220N user manual Network Bridge Communication, This projector is equipped with Network Bridge function