Hitachi ED-A220N user manual Connection to the ports, Computer IN1, B Computer IN2, C Monitor OUT

Connection to the ports

Connection to the ports

NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed.

►Only the signal that is input from the COMPUTER IN1 or IN2 can be output from the MONITOR OUT port.

USB

TYPE A

DC5V

0.5A

CONTROL

USB TYPE B HDMI	B	COMPUTERA	IN1
	COMPUTER IN2
MIC	AUDIO IN1 AUDIO IN3	AUDIO OUT S-VIDEO
MONITOR OUT
C

AUDIO IN2 VIDEO

ACOMPUTER IN1, B COMPUTER IN2, C MONITOR OUT

D-sub 15pin mini shrink jack

(1) for PC signal

•Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)

•H/V. sync. Signal: TTL level (positive/negative)

•Composite sync. Signal: TTL level

    

         

Pin	Signal	Pin	Signal
1	Video Red	10	Ground
2	Video Green	11	(No connection)
3	Video Blue	12	A : SDA (DDC data)
4	(No connection)		B , C : (No connection)
5	Ground	13	H. sync / Composite sync.
6	Ground Red	14	V. sync.
7	Ground Green	15	A : SCL (DDC clock)
8	Ground Blue		B , C : (No connection)
9	(No connection)	-	-

(2) for Component signal

•Y : Component video Y with composite sync, 1.0±0.1 Vp-p, 75 Ω terminator

•Cr/Pr : Component video Cr/Pr, 0.7±0.1 Vp-p, 75 Ω terminator

•Cb/Pb : Component video Cb/Pb, 0.7±0.1 Vp-p, 75 Ω terminator System:480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50/60,1080p@50/60

Pin		Signal	Pin	Signal
1	Cr/Pr		9	(No connection)
2	Y		10	Ground
3	Cb/Pb		11	(No connection)
4	(No connection)		12	(No connection)
5	Ground		13	(No connection)
6	Ground Cr/Pr		14	(No connection)
7	Ground Y		15	(No connection)
8	Ground Cb/Pb		-	-

3