VocoPro UHF-6800 owner manual Getting connected, Connecting to a Mixer, All-In-One System

Getting connected

The UHF-6800 gives you two options for outputting vocals

1.Each channel independently using the BALANCED A and B XLR outputs

2.Each channel together using the MIXED ¼” output

There are a number of ways to integrate the UHF-6800 into your audio system:

Connecting to a Mixer

Connect each mic channel to separate channels on the mixer using the BALANCED XLR outputs (Fig. A) or output both channels to a single input using the MIXED ¼” output (Fig. B).

Mixer

Fig. A PKJ-9090

UHF-6800

Connecting to an All-In-One System

Fig. B

Using a ¼” cable, connect the MIXED output to a ¼” mic input on your all-in-one system.

All-In-One System

GIG-MASTER

UHF-6800

10