VocoPro owner manual Getting started, Mounting the UHF-6800

Page 8

Getting started

The UHF-6800 can be mounted into a 19” rackcase and requires 1 RU(1.75”) of available rackspace.

What you will need:

• 19” Rack case (not included)	• 4 Mounting screws (not included)
• 1 RU of available rack space	• Phillips-head screwdriver (not included)

To mount:

1.Carefully line up the holes on the UHF-6800’s rack ears with holes on your rack case.

2.Screw in the mounting screws in an “X” formation to ensure even alignment and tension.

1	2
3	4

Image 8

Contents UHF-6800 Table of contents Page 110V Tech Support WelcomeToll Free Page Speciﬁcations Features and speciﬁcationsFeatures Mounting Getting startedMounting the UHF-6800 Connecting the Antennas Connecting the AC adapterInstalling New Batteries AntennasSetting Up on Stage Connecting to a Mixer Getting connectedMixer All-In-One SystemFront Panel Front panel controls and functions3 4 Rear panel controls and functions Rear PanelMicrophone control functions MicrophoneMicrophone Placement & Tone Quality Microphone basicsMicrophone Position FeedbackTurning On/Off the UHF-6800 Mic OperationsTurning On/Off the UHF-6800 Receiver Selecting a Frequency Changing the DisplayLock Switch FrequencyTo lock the frequency on the Receiver To lock the frequency on the MicrophoneAdjusting the Squelch Setting the RF Power levelTo adjust the squelch To set the RF Power levelTroubleshooting Singers Ultimate Choice