VocoPro Operations, Turning On/Off the UHF-6800 Receiver, Turning On/Off the UHF-6800 Mic

Page 16

Operations

Turning On/Off the UHF-6800 Receiver

NOTE: Before turning on the UHF-6800’s power, be sure that it is plugged into a power source. For maximum protec- tion, use a power strip or surge protector.

To power on:

1. Hold down the POWER button for 2 seconds while the unit is on.

To power off:

1. Hold down the POWER button for 2 seconds

Turning On/Off the UHF-6800 Mic

Slide the power switch to the ON position to turn the mic on and slide it to the OFF position to turn the mic off.

Power Switch

Balancing the Volume

Use the mic volume controls on the front to adjust the balance of the two mic channels. Turn the controls clockwise to raise the volume and counter-clockwise to lower the volume.

Volume Controls

Image 16

Contents UHF-6800 Table of contents Page 110V Toll Free WelcomeTech Support Page Features Features and speciﬁcationsSpeciﬁcations Mounting the UHF-6800 Getting startedMounting Connecting the Antennas Connecting the AC adapterInstalling New Batteries AntennasSetting Up on Stage Connecting to a Mixer Getting connectedMixer All-In-One System3 4 Front panel controls and functionsFront Panel Rear panel controls and functions Rear PanelMicrophone control functions MicrophoneMicrophone Placement & Tone Quality Microphone basicsMicrophone Position FeedbackTurning On/Off the UHF-6800 Receiver OperationsTurning On/Off the UHF-6800 Mic Selecting a Frequency Changing the DisplayLock Switch FrequencyTo lock the frequency on the Receiver To lock the frequency on the MicrophoneAdjusting the Squelch Setting the RF Power levelTo adjust the squelch To set the RF Power levelTroubleshooting Singers Ultimate Choice